$28.95 $37.95
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
Download the manual for the 800 Series Z-Wave Long Range Wall Remote ZEN37 800LR (PDF)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
You can now order a Wall Remote with a custom etched faceplate from our partners at Domotinc! Just click on the image below to customize your device and order it directly from Domotinc. NOTE: custom etched plates are NOT included with your purchase on The Smartest House.
Simply use the provided triangle tool to open the Wall Remote, take out the pull-tabs from the battery slots to activate the device. Follow the instructions to integrate the device with your hub and install the base in a standard switch box or on any flat surface using the provided screw or adhesive tape. Finish the installation by attaching the wall plate to the magnetic base of the Wall Remote.
How to add the Wall Remote to your Z-Wave home hub?
1. Make sure the device is within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the top button of the Remote Switch 6 times quickly to finalize the inclusion process (or scan the QR code / enter the 4-digit DSK number printed on the back of the remote if using the new SmartStart method)
4. A new remote control / button controller device will appear on your hub's device list
Simple to add, very responsive, would buy again .
Remote/switch battery powered with Scene controls. The device works great once you get it setup. The long range works with a G8 smart stick HS4. The setup is takes a little bit to figure out with HomeSeer as there are no write ups or walk throughs. The HA write is close but there are still some differences. Once setup the device works flawlessly and it works great to put a switch anywhere you want and control allot of devices. Would definitely recommend will be purchasing more.
Easy setup. It was a little tricky to remove the plastic from the battery. Reading the instructions would have helped me
Feels like I have a lutron pico switch. My family loves these.
Had an issue with the switch, assisted with troubleshooting then replaced promptly when unable to get it working.