Zooz Bypass Accessory for Smart Dimmers

REDUCE FLICKERING

PRODUCT HIGHLIGHTS

• Install the bypass accessory between your smart dimmer and the connected load to reduce flickering for selected LED bulbs
• Pigtail wires included for quick installation

HOW IT WORKS

Connect the bypass between the light (load) and your Z-Wave dimmer to eliminate the flickering effect which may occur with incompatible LED drivers.

INSTALLATION

 NOTE: Always turn the power off at the breaker when handling 120 V installations. 

1. Connect the bypass according to the appropriate wiring diagram, making sure that your smart dimmer is already installed according to the instructions and fully functional.

2. Isolate all bare wires and/or terminal screws with electrical tape to minimize risk of accidental electrical short.

3. Carefully arrange the bypass and smart dimmer along with all wires back in the electrical box.

IN THE BOX:

• Bypass
• User Manual

SPECIFICATIONS

• Power: 100-240V~, 50/60Hz
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only