$21.95 $27.95
| /
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
Download the Manual for the Zooz 800 Series Z-Wave Long Range Remote Switch ZEN34 800LR (PDF)
ZEN34 Frequently Asked Questions
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
No wiring requirements or diagrams for this one! Simply open the remote with the supplied triangle tool and remove the pull-tabs from the battery slots to power the device up. Add the device to your hub by following the instructions below and mount the base in a standard switch box or on any flat surface using the supplied screw or adhesive tape. Complete the installation by fixing the wall plate to the magnetic base of the Remote Switch.
How to include the Remote Switch to your smart home hub?
1. Make sure the device is within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the upper paddle of the Remote Switch 6 times quickly to finalize the inclusion process (or scan the QR code / enter the 4-digit DSK number printed on the back of the remote if using the new SmartStart method)
4. A new remote control / button controller device will appear on your hub's device list
I had a couple of the previous (non-LR) version of this remote and picked up the LR version because I needed another. I couldn't be happier - it's super responsive, paired right away with my controller (the Zooz 800LR USB stick + zwave.js), and works just like it's supposed to.
Got a couple of these for convenience of scene control for my bedroom. So far they have been working great. Battery life is phenomenal, been going for almost 3 months, without having to recharge.
I love that I can put this switch anywhere easily, which mitigates some of the silly electrical decisions that were made by prior owners of my house. That said, the slight half-second delay is enough to confuse guests to where they will repeatedly press it, causing no action at all. I also wish the magnet was a little stronger so the switch couldn't fall off accidentally (I like that it comes off, just wish it was a stronger hold).
I need a dimmer here, but there is a pocket door in that wall. No problem! Can't get a wire there? No problem! Perfect for nightstands too.
This is a great solution for controlling lights where you cannot run a wired switch. I also appreciate the scene control capabilities. This is the third such switch I’ve purchased