$27.95 $29.95
| /
NOTE: You'll need a dedicated PC/laptop/Raspberry Pi and Z-Wave home automation software (sold separately) to install this product.
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency/region as your end devices when buying Z-Wave controllers to include products to your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:
Zooz 800 Series Z-Wave Long Range USB Stick ZST39 User Manual (PDF)
ZST39 Frequently Asked Questions
Connect the 800 Series Z-Wave Long Range Stick to a USB port on your PC, laptop, or Raspberry Pi. Use it with your choice of home automation software, including Home Assistant with JS Z-Wave integration, Indigo, and HomeSeer. Follow the instructions for your software provider as the set-up may be different depending on the interface and operating system. Note this product is designed for expert users only and requires at least basic knowledge of programming.
Home automation software is required to control and configure your Z-Wave network. Z-Wave product compatibility will depend on the software you choose so we recommend installing an open and proven smart home system with your 800 Series Z-Wave Long Range Stick for best results.
Works well with the latest SDK 7.22. Am using as a backup.
No issues integrating this with home assistant with a motion sensor and water sensor. will likely get a second set for parent's home
I got one of the older ones that required a firmware update. After doing this, it's been a big upgrade over my previous controller in terms of range.
I'm impressed how easy it was to add the hub with HAOS. Also, I was able to quickly add my Yale Z-wave locks without any issue.
One thing to note is that make sure you're on the stable firmware release which I believe is v1.50 as of this writing.
Zooz 800 Series Z-Wave Long Range USB Stick ZST39 LR this device was easy to get working with home assistant and able to connect to all my devices. so far had been very stable.