$27.95 $38.95
| /
NOTE: Z-Wave gateway controller required - sold separately.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:
Zooz Z-Wave Long Range 800 Series S2 Universal Relay Manual (PDF)
ZEN17 Frequently Asked Questions
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Follow the appropriate diagram to wire the Universal Relay according to your application. If you don't see a diagram describing your set-up, please contact us to request help with the installation. Remember to always turn power off at the breaker before handling the wires. Never apply any voltage to the Sw input terminals!
Once you've completed the wiring, power the Universal Relay up with a USB C and a standard power adapter (sold separately) or a direct connection to 12 / 24 V power source.
Now add the Universal Relay to your hub: initiate inclusion (pairing mode) and click the Z-Wave button on the device 3 times quickly. The LED indicator will blink to indicate communication and stay on for 2 seconds to confirm inclusion.
You’ll most likely see 3 new on/off devices in your app:
2 channels for on/off control of each relay
1 master node to control all relays at the same time and to access and adjust advanced settings in (if your hub supports parameter input)
Easy to install, and can now control my garage door with my smartphone or any other device that supports a web browser
Great device, fully programable, capable of handling any automation project.
I purchased this to control 2 garage doors with 2 magnetic reed sensors, after tinkering with this for a bit, I reached out to support who was able to point me in the right direction to get this working!
There was a bug regarding Home Assistant not saving Parameters 10& 11, but you can manually set it until it has been fixed.
The product has been great after getting the correct settings in Home Assistant!
I'm using my ZEN17 to automate my air compressor air supply line. I have it connected to a motorized ball valve (https://www.amazon.com/dp/B00WDPZ26M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). I really like that the ZEN17 has relay outputs and sensor inputs that read the valve posistion which works perfect for my project. I have it connected to Hubitat hub which makes it very easy to set up and versatile.
Needed a way to switch on/off a pair of stereo speakers and this relay worked perfectly. I just wired the +ve terminals of each channel through the separate R1 and R2 relays. Works perfectly. I will add a zooz remote switch by the speakers to switch them on/off. I’ve ordered more of these so I can control several zones running off one Amp. Thanks to Smartest House folks for advising me on this solution. After spending a lot of time researching, this is by far the most efficient and reliable way to address my needs.