$29.95 $33.95
| /
NOTE: Z-Wave gateway controller required - sold separately.
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency/region as your end devices when buying Z-Wave controllers to include products in your system without issues. If you're not sure which frequency your devices use, please contact the manufacturers first. Here is what each option stands for:
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Before installing, make sure the motor runs on DC power (6-32 V DC) and it does not exceed 1.5 A. Follow the wiring diagram carefully to ensure correct installation. Use with button momentary switches only, do NOT connect to dimmers or electronic switches.
If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.
How to include the DC Motor Controller to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
4. A new on/off switch should appear on your controller's device list
First time that i integrate Drapes… works good
Zooz 700 Series Z-Wave Plus Long Range DC Motor Controller ZEN53 LR
Work with my motor as expected