Zooz 800 Series Z-Wave Long Range Outdoor Motion Sensor ZSE70 800LR | Motion, Temp, Lux

$35.95 $42.95

| /

Z-Wave Frequency
Product Condition (See full condition details below)

Outdoor MultiSensor

PRODUCT HIGHLIGHTS

  • Security alerts: Get instant motion reports to your Z-Wave hub whenever movement is detected.
  • More climate data: Monitor temperature outdoors or indoors and use this information to trigger connected devices in your system.
  • Smart lighting: program your Z-Wave outdoor lights to come on when the Zooz sensor reports motion and lux levels below your preferred set point
  • Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
  • Power it with 2 CR123A batteries (included) or a 12-24 V AC/DC connection (sold separately)
  • Works as Z-Wave signal repeater when powered with 12-24 V AC/DC (do NOT pair the sensor on USB cable and then switch to batteries)
  • 800 series Z-Wave chip: more range for reliable wireless communication
  • SmartStart and S2 authenticated security
  • Advanced settings to customize your sensor, including the ability to disable reporting for any sensor
  •  CHECK HUB COMPATIBILITY BEFORE BUYING (NOT SUPPORTED BY WINK OR ALARM PANELS) 
  • Modern minimal design with a multi-directional mini mounting bracket
  • Extended 5-year warranty (if registered within 30 days of purchase) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

    SPECIFICATIONS

      • Z-Wave Region: US / CA / MX
      • Z-Wave Chip: 800 series
      • Power: 2 CR123A battery (included) / 12-24 V AC/DC (sold separately)
      • Z-Wave Range: Up to 150 feet line of sight (or up to 1300 feet with Long Range enabled)
      • Motion Detection: 30 feet
      • Operating Humidity: 8%- 100% non-condensing
      • Light Sensor Detection Range: 0 – 65535 lux
      • Operating Temperature: 14°F to 122°F (with accuracy of ±2°C)
      • Dimensions: 2.34” x 2.4” x 2.75”
      • Installation: Indoor / Outdoor (IP66 rated)

    RESOURCES 

    Zooz 800 Series Z-Wave Long Range Outdoor Motion Sensor ZSE70 800LR Manual (PDF)

    Advanced Settings

    Support Portal

    WORKS WITH

      • Z-Box Hub (recommended for Zooz products)
      • Home Assistant (Z-Wave JS)
      • HomeSeer (with Z-Wave Plus plug-in)
      • Hubitat (with custom driver)
      • SmartThings Hub (with custom lua driver)

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    GET POWER SUPPLY

    DC:

    Your existing landscape lighting low Voltage power source will work great too!

    Customer Reviews

    Based on 28 reviews
    68%
    (19)
    32%
    (9)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    Michael Totten
    Great sensor

    The sensor works great

    D
    Dave
    works as expected

    Easy setup and no issues with it finding hub. Reports correcty and often.

    C
    CuriousB
    Great Products

    I am a longtime Home Automation enthusiast and just bought a new home. Most of my neighbors have professionally installed Control4 systems and are mostly dissatisfied with the captive support model and inflexibility that comes with Control4. I put in a Hubitat hub and Zooz devices (ZEN77, ZEN32, ZEN71, ZEN76, ZEN04, ZEN52, ZSE44, and ZSE18). There was a slight learning curve to move to Hubitat but after the initial learning phase I couldn't be happier with my system and the Zooz product.

    R
    Raymond Miller
    Works perfectly, Attachment tricky

    I'd give this 5 stars except that attaching the device to its mount is tricky if you're up on a ladder. It has to be done carefully or the case gets damaged. Still fits but it's loose. Bought 2 more anyway.

    c
    collin ziemerink
    Zooz switch is reliable and easy to manage

    Including and excluding is easy, and response time is good. I work them with Habitat and they are well configurable.