Zooz 800 Series Z-Wave Long Range Smart Plug ZEN04 800LR

Small, fast, secure

PRODUCT HIGHLIGHTS

• On/off Z-Wave control for floor lamps & small appliances (do NOT use with transformers, humidifiers, fan motors over 1/3 HP, and other motor loads)
  
• NEW 800 series Z-Wave chip: more range for reliable wireless communication
  
• Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
• Power monitoring in live mode or over time*
• SmartStart and S2 authenticated security 
• Great for use with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances, go with the Power Switch instead; NOTE: FEIT bulbs are not recommended)
  
• Status restore: the plug remembers and goes back to original state after power failure
• Built-in signal repeater: keep your network fast and healthy
  
• 5-year warranty (when registered) and lifetime tech support
  
• Check out ZEN04 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and configuration for you to take advantage of this feature.

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

• NEW: brand new product, as delivered by the factory
• OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
• REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
• USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

SPECIFICATIONS

• Region: US/CA/MX
• Power: 120 VAC, 60 Hz
• Maximum Loads: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors
• Z-Wave Range: Up to 300 feet line of sight (or up to 1 mile with Long Range enabled)
• Dimensions: 1.5" tall, 2.6" wide, 1.14" deep
• Operating Temperature: 32-104° F (0-40° C)
  
• Installation: Indoor use only

RESOURCES

Download the Manual for the Zooz 800 Series Z-Wave Long Range Smart Plug ZEN04 800LR (PDF)

ZEN04 Frequently Asked Questions

Advanced Settings

Support Portal

WORKS WITH

• Z-Box Hub (recommended for Zooz products)
• 2GIG (no advanced settings available)
• ADT Pulse (no advanced settings available)
• Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard list)
  
• Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard list)
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant (Z-Wave JS)
• HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
  
• Hubitat
• Indigo
  
• ISY994Zw
• Jeedom
• openHAB
• Ring (no power consumption info or advanced settings - on/off control only)
  
• SmartThings (access the Edge driver here)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

How It Works

Give your current small appliances the power of Z-Wave. While connected to your Z-Wave controller, enjoy wireless on/off control of your most crucial everyday devices such as lamps, TV/audio equipment, computers, and clocks (no heavy-duty appliances like washers or dryers).

Know exactly how much power they're consuming at any given moment and over time. Create custom scenes designed around your schedule: it will work just as good by your bedside as for your holiday lights (indoors only).

If your Z-Wave hub allows, the Smart Plug even lets you customize advanced configurations and parameter adjustments based on your preferences. This is a simple, low-cost electrical solution that will give you a smarter, more efficient home. 

INSTALLATION

Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load.

How to include the Smart Plug to your smart home network?
1. Insert the Smart Plug into a standard 120 V receptacle
2. Put your Z-Wave controller in inclusion/pairing mode
3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
4. A new on/off device will appear on your hub's device list