Zooz 800 Series Z-Wave Long Range Heavy Duty Light Switch ZEN75 800LR

MORE POWER!

Features & Installation

•   BETA RELEASE:   this device may not be fully supported by your hub at the time of purchase. You may need to update the firmware of this device after purchase so please check if your hub supports OTA firmware updates for Z-Wave devices before purchasing.
• Easily control your lights, fans, receptacles, and small motors via a wall switch or wirelessly with Z-Wave technology
• Great for large LED installations (up to 600 Watts) and fans (no speed control)
• Learn more about supported loads here
• This switch delivers instant on/off control (for dimming, check out our Z-Wave dimmer)
  
• 800 Series Z-Wave Chip: faster signal transmission, extended range, SmartStart inclusion, and S2 security for a seamless smart home experience
• Z-Wave Long Range ready: Expand wireless coverage up to 1300 feet with a compatible hub
• Direct 3-Way Solution: no add-on switch required! Works like the ZEN71 model (neutral wire needed, 4-Way wiring possible if direct connection to load and line are in the same box, check before buying)
  
• It's perfect for simple single pole installations too!
  
• Use with a standard-size decora wall plate (not included)

Smart Home Integration & Customization

• Adjustable LED indicator: customize color and brightness that works for you
• Built-in range test tool: quickly diagnose network connectivity issues directly from the switch
• Scene control support: activate smart home routines via multi-tap triggers*
  
• Smart bulb mode: disable the relay for wireless smart lighting control or use it as a remote add-on switch

Reliable & Energy-Efficient Performance

• Power Failure Recovery: restores last on/off status automatically
• Compatible with LED and incandescent bulbs (NOTE: FEIT bulbs are not recommended)
• Control well pumps and pool pumps up to 1HP at 120 V (or up to 3 HP at 240 V)
• Suitable for tube lights with ballast, shop lights, and halogen bulbs (up to 350 W)
• Stronger Signal Repeater: improves your Z-Wave mesh network performance.
• 5-year extended warranty (register your product here) and lifetime tech support
• Check out the Zooz Heavy Duty Light Switch ZEN75 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings for you to take advantage of this feature.

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

• NEW: brand new product, as delivered by the factory
• OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
• REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
• USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

SPECIFICATIONS

• Z-Wave Region: US/MX/CA
• Power: 120-277V AC, 50/60 Hz
• Maximum Loads (read more about supported loads here):
  • 600W LED
  • 1800W Incandescent
  • 15 A Resistive / Tungsten / Incandescent
  • 10 A Inductive Ballast / Electronic Ballast / LED
  • 1 HP at 120 VAC Motor / 3 HP at 240 VAC Motor
• Z-Wave Range: Up to 200 feet line of sight between the hub and the closest Z-Wave receiver module, up to 1300 feet with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
• Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
• Operating Temperature: 32-104° F (0-40° C)
  
• Installation: Indoor use only

RESOURCES

Download the the manual for the Zooz Z-Wave Long Range Heavy Duty Switch ZEN75 800LR (PDF)

Zooz Heavy Duty Light Switch ZEN75 Frequently Asked Questions

Advanced Settings

Support Portal

WORKS WITH

• Z-Box Hub (recommended for Zooz products)
• 2GIG (no advanced settings or scene control)
• ADT Pulse (no advanced settings or scene control)
• Home Assistant (Z-Wave JS)
• HomeSeer (with Z-Wave Plus plug-in)
  
• Homey (Zooz App for Homey)
• Hubitat
• ISY
• Ring (no advanced settings or scene control)
  
• SmartThings Hub (custom lua driver for advanced functionality coming soon)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

INSTALLATION

Before installing, make sure the load does not exceed 1800W for incandescent lights, 600W for LED's, or 15A for resistive load (read more about supported loads here).

Check your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

Here are some helpful wiring tips:

• Make sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN75 switch to work without a neutral wire.
• Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

How to include the Zooz Heavy Duty switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Scan the SmartStart QR code on the front metal plate of the switch or tap the upper paddle of the switch 3 times quickly to finalize the inclusion process manually
4. A new on/off switch should appear on your controller's device list

 NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.